Greenhouse: Shed Frame Kit Greenhouse, 1 by dreaves

dreaves wrote:
This is a broader view of the inside layer of plastic. It is 48"-wide bubble wrap, bought online. (The roll is 175', so I still have plenty of wrap available.) I started at the top, center, rafter and brought the plastic down each side, fastening it as I went. The roll is just wide enough to have an inch or so for stapling at the sides as well as a couple of inches overlap in the middle. I stretched and fastened with staples on every wood surface. I used some clear plastic wrapping tape on the overlapping edges. Don't know if it will hold in the long run.

All the interior and exterior stapling used an entire box of 1000 staples! I was using 3/8" staples in a heavy-duty gun. Both the staples and the gun worked well.