Greenhouse: Shed Frame Kit Greenhouse, 1 by dreaves

dreaves wrote:
This is the start of the outside cover. It is greenhouse film that I already had on hand after my hoop-house greenhouse project from a couple of years ago. I originally bought a 25' x 100' roll of 6 mil greenhouse plastic. I used less than 20' of the remaining roll for this project. Each end was part of an eight foot length and the sides were one full strip of the 25' width cut 8' long. The plastic is fastened to all the available wood at about a foot between staples. I started from the bottom, square, edge and worked my way up with the plastic. That way I could keep everything straight and even.